SC103 RFID – IP Proximity Device is an access control devices produced by ZK Teco, which is made with elegant design and professional surface treatment. The device has a lock control alarm, exit button and a door sensor. The Wiegand-input interface is used to connect external reader to construct a master and slave system. Also the device can be used to connect with a control panel as a reader by Wiegand-output interface. The operation can be done on the device through the LCD display and it can be done on the PC software, uploading to the device through TCP/IP, RS232/485 communication. The USB-host is used for data downloads and uploads, including user template and record etc. The SC403 is suitable for houses, small offices and factories etc

SC103 RFID Proximity Clock Features:

• Embedded relay contacts - lock, door sensor, etc.
• Built-in Serial and Ethernet ports sensor
• Built-in Wiegand input/output ports
• Less than one second user recognition
• Stores 30,000 cards and 50,000 transactions
• Built-in USB port allows for manual data transfer
• Reads Pin's and/or RFID card

SC403 RFID - IP Proximity Device is an access control devices produced by ZK Software, which is made with elegant design and professional surface treatment. The device have lock control, alarm, exit button, door sensor. The Wiegand-input interface is used to connect external reader to construct a master and slave system. Also the device can be used to connect with a control panel as a reader by Wiegand-output interface. The operation can be done on the device through the LCD display and it can be done on the PC software, uploading to the device through TCP/IP, RS232/485 communication. The USB-host is used for data downloads and uploads, including user template and record etc. The SC403 is suitable for houses, small offices and factories etc.

SC403 RFID Proximity Clock: Standard Features

• Embedded relay contacts - lock, door sensor, etc.
• Built-in Serial and Ethernet ports sensor
• Built-in Wiegand input/output ports
• Less than one second user recognition
• Stores 30,000 cards and 50,000 transactions
• Built-in USB port allows for manual data transfer
• Reads Pin's and/or RFID card

SC700 is a 125 KHz proximity access control terminal with incorporated 3 TFT LCD, the color display and touch screen operation offers a user-friendly and easy menu management. It can connect to Acess3.5 management software by Ethernet, and also operate on standalone mode, downloading data by USB flash drive. Easy to install, and with a modern design, it is the perfect solution for small installations

The latest version of SC700 includes Wiegand Input port to connect external proximity reader and it can be used as a controller’s external reader using Wiegand Out port. As a professional access control device, it allows time zones and groups, holiday managements, linkage, anti-passback functions etc.

SC700 proximity access control terminal: Features

• 3-inch TFT color display and touch screen for ease of operation and enrich user experience
• Embedded with PULL firmware which is standard with ZKAccess3.5 management software
• Incorporate with EM card reader and optional 13,56 MHz ISO14443A card reader
• Store up to 30,000 cards and 100,000 records
• Relay outputs for electric lock and alarm; Digital inputs for door status sensor and exit switch
• Wiegand input and output for connecting third party card readers or controllers for dual factor authentication
• Audio and Visual indication using speakers and LEDs
• Multi-languages display available on request

KR100 Wiegand Card Reader 125kHz EM Card Reader WG26/34 RFID Card Reader IP65 Waterproof Access Control Proximity Card Reader

KR100 Wiegand Card Reader Standard Features

• Solid epoxy potted
• IP65 Rated
• Built-in Wiegand output ports
• Less than 1 second user recognition
• Reverse polarity protection

KR100 Wiegand Card Reader Enhanced Features

• Audio - visual indications for valid / invalid entries
• 26 / 334bit Wiegand
• Integrated 125kHz RFID proximity reader

KR102E is rfid 125khz, KR102M is normal MF 13.56mhz, if you need special 13.56mhz, please kindly check first. KR102E KR102M Wiegand 26 34 Keypad RFID 125Khz 13.56mhz Access Control Slave Card Reader

KR102 RFID WIEGAND Proximity Reader: Standard Features

• Solid epoxy potted
• IP65 Rated
• Built-in Wiegand output ports
• Less than one second user recognition
• Reverse polarity protection

KR200 access control system card reader IP65 waterproof smart card reader 125KHZ RFID card reader, for The Office Use RFID Reader 26 Bit or 34 Bit Wiegand

KR200 RFID Wiegand card reader: Features

• 125KHz Proximity /13.56MHz IC Card Reader
• Read Range: Up to 10CM(125KHz)/5CM(13.56MHz).
• 26/34bit Wiegand (default).
• Easy to install on Metal Door Frame or Mullion
• External LED Control
• External Buzzer Control
• Indoor / Outdoor Operation.
• Solid Epoxy Potted
• Waterproof IP65
• Reverse Polarity Protection

[Wiegand Interface] The reader support 26/34bit Wiegand card. [LED Indicator] The reader have 2 color LED Indicators(Red and Green). [Waterproof] The reader design with IP68 waterproof grade,can be used indoor or outdoor.
Please kindly note: KR102E（Wiegand 26-RFID 125Khz, KR102M (Wiegand 34-RFID 13.56Mhz), Please notice that our wiegand 26/34 reader can't be compatible with some encrypted cards.
Such as HID, Indala, Cobra, APCiK, Paradox, Radio, Honeywell, etc. Can't work alone, need work with access control panel or access controller

KR200 RFID Wiegand card reader: Features

• Read both 125KHz proximity and 13.56MHz IC card serial number.
• Read Range: Up to 10CM(125KHz)/5CM(13.56MHz).
• 26 bit Wiegand(125KHz), 34 bit Wiegand(13.56MHz)
• Easy to install on Metal Door Frame or Mullion
• External LED Control
• External Buzzer Control
• Indoor / Outdoor Operation.
• Solid Epoxy Potted
• Reverse Polarity Protection

RFID (Radio Frequency IDentification) is a remote data storage and retrieval system that uses devices called tags, cards, transponders, or RFID tags. The fundamental purpose of RFID technology is to transmit the identity of an object (similar to a unique serial number) using radio waves. RFID technologies are grouped into the so-called Auto ID (automatic identification). RFID tags are small sticker-like devices that can be attached or incorporated into a product, an animal, or a person. They contain antennas to enable them to receive and respond to radiofrequency requests from an RFID transceiver. Passive tags do not need internal power, while active tags do. One of the advantages of using radiofrequency (instead of, for example, infrared) is that direct vision is not required between transmitter and receiver.

KR500 RFID Wiegand card reader: Features

• Read range of up to 10cm for proximity card and 5cm for Mifare card
• External LED Control
• External Buzzer Control
• Indoor / Outdoor Operation.
• Waterproof IP65
• Reverse Polarity Protection

The KR Series is the main accessories line of external Wiegand readers for all our access control devices. With an elegant and robust design, they are easy to connect and install, and offer the possibility to control one door from both sides. The LED lights indicate allowed or denied access.

With an elegant and robust design, they are easy to connect and install, and offer the possibility to control one door from both sides. The LED lights indicate allowed or denied access. They have a proximity reading range of up from 2cm to 8cm. They include LEGIC SM4200 chip which offers compatibility with multiple proximity cards like Mifare, ICODE, TI-Tagit, Sony Felica, HID iClass and much more. The fact that this series is waterproof, and the operating temperatures can range from -20º to +65º, it is the ideal solution for outdoor installation. Also they can be connected with our C3 controllers

KR501 RFID Wiegand card reader: Features

• Read range of up to 10cm for proximity card and 5cm for Mifare card
• External LED Control
• External Buzzer Control
• Indoor / Outdoor Operation.
• Waterproof IP65
• Reverse Polarity Protection
• Solid Epoxy potted
• Special Order with Mifare card module

With an elegant and robust design, they are easy to connect and install, and offer the possibility to control one door from both sides. The LED lights indicate allowed or denied access. They have a proximity reading range of up to 10cm in the E series case and up to 5cm in the M series case. The fact that this series is waterproof, and the operating temperatures can range from -20º to +65º, it is the ideal solution for outdoor installation.Also they can be connected with our C3 controllers.

KR502 RFID Wiegand card reader: Features

• Read range of up to 10cm for proximity card and 5cm for Mifare card
• External LED Control
• External Buzzer Control
• Indoor / Outdoor Operation.
• Waterproof IP65
• Reverse Polarity Protection
• Solid Epoxy potted

KR503 RFID Wiegand card reader: Features

• Read range of up to 10cm for proximity card and 5cm for Mifare card
• Built-in Wiegand output ports
• Less than one second user recognition
• Indoor / Outdoor Operation.
• IP65 Rated
• Reverse Polarity Protection
• Solid Epoxy potted

KR503 RFID Wiegand card reader: Enhanced Features

• Read range of up to 10cm for proximity card and 5cm for Mifare card
• Audio - visual indications for valid / invalid entries
• 26 / 334bit Wiegand
• Integrated 125kHz RFID proximity reader

proximity reader to capture and transmit data from a card or tag using RFID EM125 KHz or 13.56 MHz Miifare short-range, elegant design that also has iP65 protection, which allows installation in any environment. It has a 26bit Wiegand for compatibility with all INBIO access control panels, EC10, EX16 Elevator controls

KR600 RFID Wiegand card reader: Features

• Read range of up to 10cm for proximity card and 5cm for Mifare card
• External LED control
• External Buzzer Control
• Indoor / Outdoor Operation.
• Solid Epoxy potted
• Reverse Polarity Protection
• Waterproof IP64 or IP65

KR601 IP65 waterproof 13.56MHZ IC Card Access control Reader Wiegand34 card door reader for access control board

KR601 RFID Wiegand card reader: Features

• Read range of up to 10cm for proximity card and 5cm for Mifare card
• External LED control
• External Buzzer Control
• Indoor / Outdoor Operation.
• Solid Epoxy potted
• Reverse Polarity Protection
• Waterproof IP64 or IP65

KR602 RFID Wiegand Card Reader - Code keypad combined with RFID reader; built-in controller cards/key fobs/bands Mifare 13.56 МHz. Reading range 5 cm. Sound / light indication. Plastic housing, protection class IP64, for indoor and outdoor installation. Power 12 V. Color: black.

KR602 RFID Wiegand card reader: Features

• Easy to install
• 125KHz Proximity/13.56MHz Mifare Card Reader
• Read Range: Up to 10CM(125KHz)/5CM(13.56MHz)
• 26/34bit Wiegand (default)
• Easy to install on Metal Door Frame or Mullion
• External LED Control
• External Buzzer Control
• Indoor / Outdoor Operation.
• Solid Epoxy potted
• Reverse Polarity Protection
• Waterproof IP64 or IP65
• Keypad
• Reverse Polarity Protection
• Elegant and robust design