VDO Switches

TAS VDO Pressure switch 0.90 Bar - M10 has a pressure switchpoint of 0.90 Bar ± 0.15 Bar, a thread of M10 x 1 Tapered short with Contact open as pressure falls. I also has 1-pole common ground pressure switch with Switching capacity of 5 Watt Maximum

TAS VDO Pressure switch 0.50 Bar has a Pressure switchpoint of 0.50 Bar ± 0.10 Bar, it has a thread of M10 x 1 Tapered short with the Contact close as pressure falls, the Pressure switch has a 1-pole common ground with a Switching capacity of 5 Watt Maximum

TAS Veratron VDO Stainless Tubular Sensor Wiring Harness 6 Meter is a stainless Tubular sensor Wiring Harness with Connection cable of 6 Meters used for Vetaron VDO Tubular Sensor with TE Superseal Connector IP67 2-Pole. The Tubular sensor wiring harness is also suitable for water and fuel and its of high quality and sold at an affordable price.

TAS Veratron VDO Ø54mm SS 316 Tubular Sensor Contactless 1.200 mm - Empty-Full 240-33 Ohm is a stainless steel Tubular sensor with a Tube length of 1200mm to 38mm, it has a 5 Hole SAE Flange of 54mm PA66 GF30. This Tubular Sensor has a resistance of empty to full of 240-30 ohm suitable for water and fuel and its of high quality and sold at an affordable price.

TAS Continental VDO Ø54mm SS 316 Tubular Contactless 400 mm - Empty-Full 90-1 Ohm is a plastic / stainless steel Tubular Reed switch sensor with a Tube length of 400mm - Ø 40mm, it has a 5 Hole SAE Flange of 54mm PA66 GF30. This Tubular Sensor has a resistance of empty to full of 91-1 Ohm and it's suitable for water and fuel.

TAS Continental VDO Ø54mm SS 316 Tubular Contactless 750 mm - Empty-Full 90-1 Ohm is a plastic / stainless steel Tubular Reed switch sensor with a Tube length of 750mm - Ø 40mm, it has a 5 Hole SAE Flange of 54mm PA66 GF30. This Tubular Sensor has a resistance of empty to full of 91-1 Ohm and it's suitable for water and fuel. We also offer many other Continental VDO Tubular Contractless ranges of 800mm, 190mm, 700mm, 650mm, 550mm and much much more.

TAS Veratron VDO Stainless Tubular Sensor Wiring Harness 15 Centimeter is an affordable Tubular Sensor Wiring Harness with a connection cable of 15 centimeters, and it is used for Veratron VDO Tubular Sensor with TE Superseal Connector of IP67-2-Pole

Our VDO Ø54mm Fuel tubular sender 150mm is a metal Fuel tubular sensor with a Dip pipe length of 150 mm and a 5-Hole SAE Flange of 54mm, the sensor has a resistance empty to full of 69.0 to 4.5 Ohm

Our VDO Dual Station Pressure sender 0-28 Bar is a Quality sender and affordable it has great features such as a Presure range of 0 to 28 Bar, with a thread of 1/8 - 27 NPTF, with the pressure sender resistance range of 5 - 90 Ohm Dual and a sensor signal of 2-pole insulated return, with no contact warning.

Our VDO Ø54mm Fuel tubular sender 387.5mm is a Metal fuel tubular sensor unit with a dip pipe length of 387.5 mm with a 5-Hole SAE Flange of 54 mm and an empty-full resistance of 70.1 - 1.5 ohm.

Our VDO Ø54mm Fuel tubular sender 279mm is a Metal fuel tubular sensor unit with a dip pipe length of 279 mm with a 5-Hole SAE Flange of 54 mm and an empty-full resistance of 70.3 - 2.0 Ohm.

Our VDO Ø54mm Fuel tubular sender 230mm is a Metal fuel tubular sensor unit with a dip pipe length of 230mm with a 5-Hole SAE Flange of 54 mm and an empty-full resistance of 84.0 - 2.5 Ohm.

Our VDO Heavy Duty Ø80mm Tubular sender - 1.250mm is a Heavy Duty fuel tubular sensor with a Dip Pipe Length of 1.250 mm, it has a 6 Hole Flange of 80mm with an empty to full resistance of 74.2 - 0.5 ohm.

Our VDO Heavy Duty Ø80mm Tubular sender - 551 mm is a Heavy Duty fuel tubular sensor with a Dip Pipe Length of 551 mm, it has a 6 Hole Flange of 80mm with an empty to full resistance of 69.3 - 0.8 Ohm.

Our VDO Heavy Duty Ø80mm Tubular sender - 596 mm is a Heavy Duty fuel tubular sensor with a Dip Pipe Length of 596 mm, it has a 6 Hole Flange of 80mm with an empty to full resistance of 75.7 - 1.0 Ohm.

Our VDO Heavy Duty Ø80mm Tubular sender - 881mm is a Heavy Duty fuel tubular sensor with a Dip Pipe Length of 881 mm, it has a 6 Hole Flange of 80mm with an empty to full resistance of 78.0 - 0.7 Ohm.

Our VDO Fuel Tubular Sensor 80mm 6-Hole adapter flange to 54 mm 5-Hole SAE is a Tank mounting adapter from 80mm to 54mm For VDO fuel sensors, among others.

Our Veratron Fresh water lever arm sender 3-180 Ohm is a Tank mounting adapter from 80mm to 54mm For VDO fuel sensors, among others.

Our Veratron Fresh Water Sensor 4-20mA - Tank Depth 80-600mm is Only fresh water Application it has tank depth 80 mm to 600 mm with a capacitive sensor system and an empty to full output of 4 to 20mA.

Our Veratron Fresh Water Sensor 4-20mA - Tank Depth 80-600mm is Only fresh water Application it has tank depth 80 mm to 600 mm with a capacitive sensor system and an empty to full output of 4 to 20mA.

Our VDO Waste water sensor 4-20 mA - 80-600mm is a Waste water level sensor - Thread G 1 1/4, with a tank depth of 80 mm to 600 mm and a Capacitive Sensor system and it has a the empty-full output of 4 - 20mA.

TAS VDO IP Coolant sensor 140°C is a Quality and affordable IP Coolant sensor with a temperature range of -40°C to +140°C and a Thread of M12 x 1.5. The Coolant IP Sensor has a sensor resistance of 90 °C = 205.4 Ohm and 2-pole insulated return sensor signal with an IP69K Connector PRC2-0021-A.

TAS VDO IP Oil Temperature sensor 150°C is a Quality and affordable IP Oil Temperature sensor with a temperature range of -40°C to +150°C and a Thread of M12 x 1.5. The Coolant IP Sensor has a sensor resistance of 90 °C = 2.803 Ohm and 2-pole insulated return sensor signal with an waterproof connector.

TAS VDO IP Coolant sensor 130°C is a Quality and affordable IP Coolant sensor with a temperature range of -40°C to +130°C and a Thread of M12 x 1.5. The Coolant IP Sensor has a sensor resistance of 90 °C = 260.7 Ohm and 2-pole insulated return sensor signal with IP69K waterproof connector.

TAS VDO Air Temperature sender 150°C is a Quality and affordable Air Temperature sender with a temperature range of -40°C tot +150°C and a Thread of M18 x 1.5. The Air Temperature sender has a sensor resistance of 168 kOhm - 92.7 Ohm and 2-pole insulated return sensor signal with No warning contact.

TAS Continental VDO Oil temperature sender 150°C is a Quality and affordable Oil temperature sender with a temperature range of +50°C to +150°C and a Thread of M14 x 1.5. The Oil temperature sender has a sensor resistance of 322.8 - 18.6 Ohm and 1-pole common ground sensor signal with 130 °C ± 3 °C warning contact.

TAS VDO Oil Temperature sensor 250°C is a Special sensor with 2 measuring points with a temperature range of 250°C and a Thread of M14 x 1.5. The Oil temperature sensor has a sender resistance of 210 °C = 18.9 Ohm and 1-pole common ground sensor signal with no warning contact.

TAS Continental VDO Coolant temperature sender 120°C is a Quality and affordable Coolant temperature sender with a temperature range of +40 °C to +120 °C and a Thread of M14 x 1.5. The Coolant temperature sender has a sender resistance of 287.4 - 22.7 Ohm and 1-pole common ground sensor signal with no warning contact.

TAS VDO Oil temperature sender 200°C is a Quality and affordable Oil temperature sender with a temperature range of +50°C to +200°C and a Thread of M10 x 1.5. The Oil temperature sender has a sender resistance of 482.5 - 14.3 Ohm and 1-pole common ground sensor signal with no warning contact.

TAS Continental VDO Oil temperature sender 150°C is a Quality and affordable Oil temperature sender with a temperature range of +50°C to +150°C and a Thread of 1/4-18 NPTF. The Oil temperature sender has a sender resistance of 322.8 - 18.6 Ohm and 2-pole insulated return sensor signal with no warning contact.

TAS VDO Outside air temperature sender 50°C is a Quality and affordable Outside air temperature sender with a temperature range of -25°C to +50°C and a sensor of 6.2 mm. The Outside air temperature sender has a sender resistance of 0 °C = 4082 Ohm and 2-pole insulated return sensor signal with Cable length of 3 meter.

TAS VDO Coolant temperature sender 120°C is a Quality and affordable Coolant temperature sender with a temperature range of +40 °C to +120 °C and a Thread of M14 x 1.5. The Coolant temperature sender has a sender resistance of 287.4 - 22.7 Ohm and 1-pole common ground sensor signal with no warning contact.

TAS VDO Dual Station Coolant temperature sender 120°C is a Quality and affordable Coolant temperature sender with a temperature range of +40 °C to +120 °C and a Thread of 1/4-18 NPTF. The Coolant temperature sender has a sender resistance of 90 °C = 25.6 Ohm and 2-pole insulated return sensor signal with no warning contact.

TAS VDO Dual Station Coolant temperature sender 120°C is a Quality and affordable Coolant temperature sender with a temperature range of +40 °C to +120 °C and a Thread of 1/4-18 NPTF. The Coolant temperature sender has a sender resistance of 90 °C = 25.6 Ohm and 1-pole common ground sensor signal.

TAS VDO Blocking oscillator tacho speed sender is a Quality and affordable Blocking oscillator tacho speed sender with a Blocking Oscillator of 400Hz sender type, it has a thread of M18 x 1.5 Male and a Stabilized power supply of 8 - 15V, it has a 2-Pole insulated return sensor signal and a Bayonet 4-pole 2.8mm connector.

TAS VDO Blocking oscillator tacho speed sender is a Quality and affordable Blocking oscillator tacho speed sender with a Blocking Oscillator of 400Hz sender type, it has a thread of M18 x 1.5 Male and a Stabilized power supply of 8 - 15V, it has a 2-Pole insulated return sensor signal and a 4-pole special OEM connector.

TAS VDO Generator tacho speed sender is a Quality and affordable Generator tacho speed sender with a Sender type of Generator 3.000 RPM and a thread of M22 x 1.5 with an output 19.3 V bij 2.000 RPM and a 2-pole insulated return sensor signal.

TAS VDO Generator tacho speed sender is a Quality and affordable Generator tacho speed sender with a Sender type of Generator 3.000 RPM and a thread of 7/8" - 18 NS-2B with an output 19.3 V bij 2.000 RPM and a 2-pole insulated return sensor signal and M4 thread 2x connector.

TAS VDO Inductive tacho speed sender M18 is a Quality and affordable Generator tacho speed sender with a Inductive Sender type of - 250Hz and a thread of M18 x 1.5, the tacho speed sender also has a resistance of 1.050 ± 100 Ohm, a Sensor signal of 2-pole insulated return and Blade 6.3x0.8mm Connector.

TAS VDO High speed GPS Module - Speed to puls is a Quality and affordable High speed GPS Module with GPS Puls converter, a IP65 protection glass and operating voltage of 8 - 32V DC. The GPS Module has a Speedo meter pulses signal and Dimension of LxWxH 76.3x35x15mm, it coud be applied on a VDO Cockpit - ViewLine.

TAS VDO Blocking oscillator tacho - speed sender is a Quality and affordable Blocking oscillator tacho speed sender with a Blocking Oscillator of 400Hz Sender type, it has a power supply of 8 - 15V stabilizer and a sensor signal of 2-Pole insulated return with a Bayonet 4-pole 2.8mm connector.

TAS VDO Mechanical tacho - speed sender - M18 is a Quality and affordable Mechanical tacho - speed sender it is a Mechanical sender of 3.000 RPM with a thread of M18 x 1.5 (2X) and a frequency of 100Hz per 1.000 RPM, it has also a sensor signal of 2-pole insulated return with a Kostal 2-pole pin 4mm connector.